Hang-gliding to Oz…

…is what Neighbor D and I almost did this afternoon, when a strong gust came along just as we got that upper piece into place. 100_5036It was hang on like grim death or let it fly into our faces and knock us right off the scaffold. I truly don’t know how people do this for a living.100_5037Got a fair amount of work done today, though. I finished the lower part of the front this morning, and then D came over and we tarpapered 2/3 of the top, put up some flashing and that one sheet of siding. But it took three hours to do it and scared us both to death. He’s more capable with heights than I am but they don’t thrill him, and around 2:30 we were both just done for the day.

About Joel

You shouldn't ask these questions of a paranoid recluse, you know.
This entry was posted in Uncategorized. Bookmark the permalink.

4 Responses to Hang-gliding to Oz…

  1. coloradohermit says:

    Looks really good! And I’m glad there was no actual hang gliding involved that would have ended up with you both wedged into the mesquite trees. I doubt LB could have unstuck you.

  2. Claire says:

    Definitely looking good, Joel. And I second coloradohermit’s kudos for not actually hang-gliding.

    Question: Did you do the backwall with the Hardiepanel and are you now doing the sides and front with T1-11? Makes sense (especially budgetwise, and for protecting the most vulnerable wall). Just curious to know if that’s what we’re actually seeing here.

  3. Joel says:

    Yeah. With the money received from the fund-raiser I was able to use Hardie Panel on the rear wall, which is the drip wall as well as the sunniest and windiest side, and upgrade to plywood paneling on the sides and front as opposed to the pressboard panels I’d originally intended. The budget (and my and my co-worker’s physical strength, to be honest) did not stretch as far as 100% Hardie Panel. Today I was happy for that.

  4. Paul Bonneau says:

    I was once putting a metal roof on a barn. Big pieces, 3 feet wide and at least 12 feet long. As we got to the last piece, right by the edge (at least two stories up), a wind came and took the sheet I was holding onto. I clearly remember deciding I didn’t want to go over the edge, and I didn’t want to go through the roof rafters, and I didn’t (for some reason) want to let go of the sheet. I spread-eagled and fell down face forward on the rafters, still holding the sheet with one hand. Split a lip but nothing more, and then we screwed the sheet down and got the hell off that roof. One should only attempt metal roofing on a calm day…

Leave a Reply

Your email address will not be published. Required fields are marked *